Presonus HD9 Pro Closed-back Studio Reference Monitoring Headphones+Microphone

Description

Car Audio & Video
Pro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
Package: Presonus HD9 Professional Closed-Back Studio Reference Monitoring Headphones + Rockville RCM01 Pro Studio Recording Condenser Microphone Mic With High Quality Metal Construction and Shock Mount
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
BRAND NEW IN ORIGINAL PACKAGING
Warranty:
1 YEAR MANUFACTURER
Product Description
New Page 1
Package Includes:
(1) Presonus HD9 Professional Closed-back Studio Reference Monitoring Headphones
(1) Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
Authorized PreSonus Dealer!
Description of HD9:
Nothing but clear, accurate sound.
The HD9’s closed-back acoustic design provides superior listening isolation and reduces headphone bleed, so you hear nothing but music—and your housemates hear nothing at all.
Peerless construction, surgical accuracy.
The HD9's 45 mm dynamic, neodymium drivers and high power handling (900 mW per channel into 40 ohms) deliver loud, clear, clean audio, minimizing listening fatigue. Best of all, its tailored frequency response extends all the way from 10 Hz to 26 kHz, with accurate bass response, enabling precise mixes.
Comfort matters.
The lightweight HD9 features an adjustable headband, cups that rotate 180° on two axes, and comfortable, durable ear pads. The straight, ten-foot cable drops down one side so it doesn’t get in your way. The result is a comfortable listening experience that you’ll continue to enjoy during long sessions. And the HD9 is built tough so you can rely on it wherever your travels take you.
You listen thoughtfully—so why not think like a listener?
The PreSonus HD9s are an invaluable addition to your sonic toolbox. While there will always be a place in the studio for powerful and articulate studio monitors, fact is that more people are choosing portable, personal listening solutions nowadays. As trends in listening shift, it’s wise for you to check your mixes on high-quality headphones as well as on your finely calibrated studio monitors. With the HD9s, you can rest assured that your mixes are translating well across myriad listening environments. And with the HD9’s combination of comfort, adjustability, sturdy construction, and acoustic isolation, you can mix better for longer.
Features:
Presonus HD9 Professional Closed-Back Studio Reference Monitoring Headphones
Precision-Tuned, Closed Back, Circumaural Acoustic Design
Tailored Frequency Response: 10Hz - 26 kHz; ±3 dB
Accurate Low-Frequency Response
High-Power Handling: 1,800 mW @ 40 Ohms, 900 mW Per Channel
45mm Dynamic, Neodymium Drivers
Two-Axis, 180° Cup Rotation
Lightweight
Comfortable, Long-Lasting Ear Pads
Adjustable Headband
10 foot (3m), Straight, Single-Sided Cable with 1/8" Connector
Includes: Gold-plated 1/8 inch-to-¼ inch adapter, Storage Bag
Video of RCM01:
Unboxing Video of RCM01:
The Rockville RMC01 condenser microphone performs better than famous branded microphones that cost over 0.
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM01 amazing in studio applications.
The full metal construction makes the RCM01 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of all metal. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
RCM01 Condenser Microphone
100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
Metal shock mount
Anti-wind foam cap
Owners Manual
Warranty card
Features:
Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
RCM01 condenser microphone
Full metal high quality construction
Polar Pattern: Internally Polarized Condenser Cardioid Design
Large diaphragm for smooth, natural sound and low noise
Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer)
Uni-directional
Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
Output impedance: 200Ω±30%(at 1kHz)
Standard operating voltage: 3V
Operating voltage range: 1.5V-10V
Current consumption: less than 500uA
Voltage deduction characteristic: within 3dB at 2V
S/N ratio: More than 24dB
Frequency Response: 30Hz - 20 KHz
Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
Load impedance: Greater or = to 1000 Ohms
Equivalent Noise level: Less than 18dB A (IEC581-5)
Max. Input SPL: 126dB(THD≤1.0% at 1kHZ)
Electrical current: Greater than 4.8Ma
Microphone body net weight:325 Grams (0.72 Pounds)
Microphone Max.diameter 48mm (1.89” inches)
Microphone Length 157mm (6.18” inches)
Microphone material: steel grille + Zinc alloy (handheld part)
PCB Layout: Surface mount
Owner’s Manual
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: HD9+RCM01
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved.  |
eBay Template Design